willow park

Community Blog

DIY Bottle Opener

  1. Purchase a 1x6x6 from Home Depot or your local hardware store. Cut 3 pieces at 4″, one piece at 6″ and one piece at 21″.  A simple hand saw will work great if you don’t have a saw!
  2. Next, attach the 4″ pieces like this with wood glue and finishing nails.
  3. Using wood glue and finishing nails, attach the 6″ piece to the front of the 4″ pieces. (Touching all three wood pieces).

  4.   Add wood glue to the back of the bottle cap catcher (other three panel side) and attach it to the 21″ board with finishing nails and attach it to the 21″ board with finishing nails (from the back of the 21″ board into the bottle cap catcher).

  5. Purchase a Wall Mounted Bottle opener
  6. Enjoy!