Willow Park Wines and Spirits

willow park

Community Blog

Ali Madsen
 
November 10, 2017 | DIY Crafts | Ali Madsen

Wine Bottle Bird Feeder

Recycled Wine Bottle Bird Feeder

(1) 8 foot 1 x 2 pine furring strip (my local price $1.18)

(1) 8 foot 1 x 4 pine furring strip ($2.08)

(1) 3/16 x 2 x 2 piece luan plywood ($3.48)

Hose clamp (such as this)

wine bottle (11 inches long)

table saw

wood glue

brad nailer or hammer and nails

1)  2 – 1×2 @ 11″     These should be cut at 45* on one end, with a 5/16th” wide channel that is 1/4″ from the bottom of the side and 1/4 deep.  They also need the same channel running vertically 1/4″ from the back.

2)  2 – 1×2 @ 3 5/8″     These pieces will need a channel that is 5/16th” wide channel that is 1/4″ from the back and 1/4″ deep.

3)  1 – 1×2 @ 4 5/8″     This will also be needing the same channel that is 5/16th” wide and 1/4 ” from the back and 1/4″ deep as well as a channel on the top using the same measurements.

4)  1 – 1×2 @ 6″     Again, this piece will need a channel that is 5/16th” wide, 1/4″ from the back and 1/4″ deep.

5)  2 – 1×4 @ 6″     These boards form the roof and need to have opposing (parallel) 45* angles.  They also need to have the same channel as above: 5/16th” wide by 1/4″ deep, 1/4″ from the back.

6)  1 – plywood @ 5×5″

7)  1 – plywood @ 5×12 1/2″     Angled at 45* down to 10″ at sides

Recipe adapted from www.downhomeinspiration.com

 

 

Comments

Commenting has been turned off.